7
7.1 Replacing the motor
7-254
E Siemens AG 2013 All Rights Reserved
SIMODRIVE POSMO A User Manual (POS1) – 08/2013 Edition
You can also obtain the address of your local regional spare parts cen-
ter at the following Internet address
S Address: http://www.siemens.com/automation/partner
S Product group: SIMODRIVE
Note
If the ”old” connection cover of the SIMODRIVE POSMO A is not
defective, then it should be left at the mounting location and should
then be re–mounted on the ”new” positioning motor with the existing
wiring.
Addresses to
return the
positioning motor
7 Installation and Service
04.0108.0105.13