4 Configuration and Settings
Drehzahlachse mit SINA_SPEED
Entry-ID: 109485727, V1.0, 06/2017
Siemens AG 2017 All rights reserved
The Commissioning Wizard can be
found in the drive folder under
“Commissioning”.
Follow the Commissioning Wizard.
Useful support can be found in the
TIA Portal online help.
It is particularly important to
configure standard telegram 1 to
control the communication.
As a last step of the commissioning
wizard, you have to save the drive
settings. To do so, check the “RAM
data to EEPROM” checkbox and
finish the wizard.
Then disconnect the online
connection to the drive and load the
configuration stored in the drive into
the offline project.
Save the TIA Portal project.
To Next Page
Loading...
