Siemens SINAMICS G Series - HMI Start Screen Navigation

6 Operating the application example
Drehzahlachse mit SINA_SPEED
Entry-ID: 109485727, V1.0, 06/2017
26
 Siemens AG 2017 All rights reserved
Figure 6-2: Starting simulation mode
6.1.1 Start screen
When activating the SIMATIC HMI or the simulation, the start screen is first
displayed.
Figure 6-3: Start screen
A navigation bar is located on the right side of the screen. It is used to go to more
operator screens.
Table 6-1: Buttons in the navigation bar
Operation
Action
Switch between German and English
Start
Back to the start screen
SINA_SPEED
Go to operator screen for “SINA_SPEED” block
System
Go to the HMI system functions
Support
View the support functions