Siemens SINAMICS G Series - HMI System Functions; Accessing Support Information

6 Operating the application example
Drehzahlachse mit SINA_SPEED
Entry-ID: 109485727, V1.0, 06/2017
28
 Siemens AG 2017 All rights reserved
6.1.3 System functions
The system functions of the HMI can be accessed in the “System” operator screen.
Figure 6-5: “System” operator screen
Table 6-4: System function buttons
Operation
Action
Clean screen
(Clean Screen)
Activate cleaning screen of the HMI
Calibrate touchscreen
(Calibrate)
Activation of the calibration of the HMI touchscreen
Online
Activation of the “Online” mode
Offline
Activation of the “Offline” mode
Stop runtime
(Runtime Stop)
Terminate runtime
Transfer
Start the program transfer to the HMI
6.1.4 Support information
The “Support” button contains information on the service range of the Siemens
Industry Online Support.
Figure 6-6: Support information