Siemens SINAMICS G Series - SINAMICS Installation and Commissioning; Hardware Installation Overview

5 Installation and commissioning
Drehzahlachse mit SINA_SPEED
Entry-ID: 109485727, V1.0, 06/2017
21
 Siemens AG 2017 All rights reserved
5 Installation and commissioning
5.1 Installing the hardware
The figure below shows the hardware setup of the application.
Figure 5-1: Hardware setup
L1
L2
L3
N
PE
M
L1 L2 L3 PE
U2 V2 W2
M L+
PN PN
M L+
DC 24V
SINAMICS
PM 240-2
SIMATIC Panel
KTP400
(optional)
SIMATIC S7
CPU 1215C
DC 24V
SINAMICS
CU 240E-2 PN-F
PN PN
3AC 400V
PN
Note
The setup guidelines for SINAMICS drives and SIMATIC controllers must
generally be followed.