Siemens SINAMICS G Series - Block I;O Connection and Project Save

4 Configuration and Settings
Drehzahlachse mit SINA_SPEED
Entry-ID: 109485727, V1.0, 06/2017
20
 Siemens AG 2017 All rights reserved
No.
Action
Remark
5.
Connect the inputs and outputs
of the block as described in
chapter 3.2
6.
It is recommended to copy the
inputs and outputs of the block
"SINA_SPEED" into a control panel.
(see chapter 6.2)
7.
Save the project and load the
program into the controller.