General purpose application
• Macro 101
• Setpoint via a 0...10 V signal
• Analog setpoint can be overridden with 4 fixed speeds
• Flying restart and automatic restart are activated
• Essential service mode (in the event of fire)
DIP switch for AI0
and AI1 (terminals
3/4 and 10/11)
Fault
Output current (0..20 mA)
Operation
Enable second VSD
GND / DI COM
Speed (0..20 mA)
PTC A / PTC B
ON / OFF
Fix speed 3
Fix speed 2
Fix speed 1
ESM activation
External fault
21
2 / 7
Control
system
0-10V
To Next Page
Loading...
