Siemens SINAMICS G120P - Page 25

Pump delta P control
• Macro 104
• Differential pressure is controlled by the integrated PID controller
• Flying restart and automatic restart are activated
DIP switch for AI0
and AI1 (terminals
3/4 and 10/11)
Fault
Output current (0..20 mA)
Operation
Alarm
Speed (0..20 mA)
PTC A / PTC B
Pressure sensor
0-10 V, e.g.
QBE64-DP4
ON / OFF
GND / DI COM
21
3 / 7