Spare parts
10
NOTICE
Non-approved spare parts
Using non-approved spare parts can affect the function of the equipment and damage it. Third-
party spare parts and unapproved spare parts may not meet the requirements.
Therefore, only use spare parts that have been approved by the manufacturer.
To request spare parts, please contact the Siemens sales office responsible for your region.
You can find an overview of the Siemens contact partners in your region here
(www.siemens.com/services/partner).
Note
Always indicate the part number and - if known - the order number (MLFB) of the spare part
required. You can find the order number as follows:
The device label is attached to or next to each component. Find out which item code the
required spare part has. The parts list supplied with the drive indicates the part number and,
where appropriate, the order number corresponding to the item code. For inquiries by e-mail,
if possible send a photograph of the product, spare part, rating plate.
Use Spares on Web (https://b2b-extern.automation.siemens.com/
spares_on_web(bD1kZSZjPTA4MCZkPW1pbg==)/default.htm) to obtain information about
spare parts for your drive.
The following parts list contains information on the components installed in the converter. The
data in this list can be used for ordering spare parts.
SINAMICS GL150 6SL38503UM114PA0Z
Operating Instructions 04/2017 133
To Next Page
Loading...
