Siemens SINAMICS GL150 - Parameters

NOTICE
Incorrect parameterization
The drive may malfunction if you change the parameters.
Do not change the parameters, e.g. for the motor circuit-breaker.
Note
To complement these operating instructions, the List Manual contains an overview of all
parameters as well as a selection of function diagrams to describe the operating principle.
8.1 Parameters
The drive is adapted to the relevant drive task by means of parameters. Each parameter is
identified by a unique parameter number and specific attributes. Such attributes are, for
example:
● Readable attributes
● Writable attributes
● BICO attributes
The parameters can be accessed via the following means:
● PC with commissioning tool via PROFIBUS
● Operator panel
Parameter types
The following parameters are available:
● Adjustable parameters (write/read)
Adjustable parameters directly influence the response of a function, e.g. the ramp-up and
ramp-down time of a ramp-function generator.
● Visualization parameters (read-only)
Display parameters are used to display internal variables, e.g. the actual motor current.
3DUDPHWHU
UHDGUUHDGZULWHS
%,&2RXWSXW1RUPDOUHDG
SDUDPHWHUV
%,&2LQSXW1RUPDOUHDGZULWH
SDUDPHWHUV
Figure 8-1 Parameter types
Operation
8.1 Parameters
SINAMICS GL150 6SL38503UM114PA0Z
90 Operating Instructions 04/2017