Siemens SINAMICS GL150 - Environmental Conditions

Use of separately excited synchronous motors without speed encoder
Setpoint step change from 0 % to 100 % of rated
torque
Rise time (peak time): < 40 ms
Rise time: < 30 ms
Settling time: < 200 ms
Setpoint step change from 40% to 60% of rated
torque
Rise time (peak time): < 42 ms
Rise time: < 15 ms
Settling time: < 100 ms
B.6 Environmental conditions
Climatic environmental conditions
Table B-7 Climatic environmental conditions
Storage with suitable packag‐
ing
Transport with suitable pack‐
aging
Operation (industrial)
Ambient temperature -25° C to +70° C -25° C to +70° C 5° C to +40° C
Relative humidity 5% to 95%
(Only low condensation is
permitted. The drive must be
completely dry before com‐
missioning.)
5% to 75% 5% to 85%
(Condensation is not permit‐
ted)
Other climatic conditions ac‐
cording to class
1K3 according to DIN EN
60721‑3‑1 (IEC 60721‑3‑1)
2K2 according to DIN EN
60721‑3‑2 (IEC 60721‑3‑2)
3K3 according to DIN EN
60721‑3‑3 (IEC 60721‑3‑3)
Pollution degree 2 without conducting contam‐
ination according to DIN EN
61800-5-1 / VDE 0160 T105
(IEC 61800-5-1)
2 without conducting contam‐
ination according to DIN EN
61800-5-1 / VDE 0160 T105
(IEC 61800-5-1)
2 without conducting contam‐
ination according to DIN EN
61800-5-1 / VDE 0160 T105
(IEC 61800-5-1)
Mechanical ambient conditions
Table B-8 Mechanical ambient conditions
Storage with suitable packag‐
ing
Transport with suitable pack‐
aging
Operation
Class 1M2 according to
DIN EN 60721‑3‑1
(IEC 60721‑3‑1)
2M2 according to
DIN EN 60721‑3‑2
(IEC 60721‑3‑2)
3M1 according to
DIN EN 60721‑3‑3
(IEC 60721‑3‑3)
Technical specifications and drawings
B.6 Environmental conditions
SINAMICS GL150 6SL38503UM114PA0Z
142 Operating Instructions 04/2017