Siemens SINAMICS GL150 - Fastening the Cable Ducts with Cable Ties

6.16 Fastening the cable ducts with cable ties
Fasten all cable ducts whose cover faces downward with cable ties. Wind the cable ties around
the entire cable duct. The cable ties must be located at the same positions as in the delivered
state.
Figure 6-10 Schematic diagram: Fastening the cable ties
Electrical connection
6.16 Fastening the cable ducts with cable ties
SINAMICS GL150 6SL38555UN113KA0Z
Operating Instructions Rev.201910281450 EXAMPLE 103