Siemens SINAMICS GL150

r0949 Fault value DO
Displays additional information about the fault that occurred (as integer number). All objects
r2122 Counter, alarm buffer changes DO
This counter is incremented every time the alarm buffer changes. All objects
r2123 Alarm time received in milliseconds DO
Displays the system runtime in milliseconds when the alarm occurred. All objects
r2124 Alarm value DO
Displays additional information about the active alarm (as integer number). All objects
r2125 Alarm time removed in milliseconds DO
Displays the system runtime in milliseconds when the alarm was cleared All objects
8.5.2.3 Indicating and rectifying faults
The cabinet device has a number of protective functions that protect the converter from
damage in the event of a fault (faults and alarms).
A list of faults and alarms with remedies for their rectification can be found in the List Manual in
the "faults and alarms" chapter.
Operation
8.5 Fault and system messages
SINAMICS GL150 6SL38555UN113KA0Z
Operating Instructions Rev.201910281450 EXAMPLE 119