3.5.17 Suitable for marine use with individual certificate from Det Norske Veritas (DNV)
(option E51)
The design and implementation of the drive corresponds to the requirements of the Det Norske
classification society.
3.5.18 Suitable for marine use with individual certificate from American Bureau of
Shipping (ABS) (option E61)
This drive version meets the requirements of the American Bureau of Shipping (ABS)
classification society.
3.5.19 Suitable for marine use with individual certificate from Chinese Classification
Society (CCS) (option E71)
This drive version meets the requirements of the Chinese Classification Society (CCS).
This option contains the following equipment/features:
● Strengthened mechanical cabinet design
● Handrail below the operator panel
● Mechanical cabinet door locking
● Cabinet design in an IP44 degree of protection
● Anti-condensation heating
The drive can be welded to the ship's hull structure.
3.5.20 PROFINET interface (option G24)
The CBE20 communication module allows the drive to be networked using PROFINET.
For more information about communication modules, see document "Supplementary
component descriptions".
3.5.21 DeviceNet interface (option G23)
Using the Anybus X-Gateway communication module, the converter can be connected to the
DeviceNet third-party bus system.
The standard version of the drive is equipped with a PROFIBUS interface (slave). The "Anybus-
X-Gateway" supplied by HMS Industrial Networks is used to link the drive to the third-party bus
system. The X gateway is connected to the CU320 Control Unit using a PROFIBUS cable. The
option is supplied with a null modem cable for configuring the X gateway. The gateway is
preconfigured to 20 bytes of I/O data. The data size is changed via the configuration interface
from a PG/PC (standard PC tool "Windows Hyper Terminal").
Description
3.5 Options
SINAMICS GL150 6SL38555UN113KA0Z
Operating Instructions Rev.201910281450 EXAMPLE 53
To Next Page
Loading...
