3. Remove the SD card from the data slot.
Figure 9-10 Remove the operator panel.
4. Release the cables ② at the operator panel.
5. Remove the screws ① (9 x) of the fastening clips. Remove the mounting clips. Withdraw the
operator panel from the cabinet door towards the front.
6. Fit a new operator panel. Fasten the operator panel.
7. Connect the cables.
Maintenance
9.5 Repair
SINAMICS SM150 6SL3845-7NN46-7AA2
152 Operating Instructions Rev.201910281345 EXAMPLE
To Next Page
Loading...
