Siemens SINAMICS V20 Series User Manual

Parameter list
7.2 Parameter list
SINAMICS V20 Inverter
Operating Instructions, 07/2012, A5E03728167
157
Parameter Function Range Factory
default
Can be
changed
Scaling Data
set
Data
type
Acc.
Level
Note: All values in RAM are transferred to EEPROM.
Parameter is automatically reset to 0 (default) after successful transfer.
The storage from RAM to EEPROM is accomplished via P0971. The communications are reset, if the
transfer was successful. During the reset process communications will be interrupted.
• BOP displays 88888
After completion of the transfer process, the communication between the inverter and external peripherals
(BOP, USS or Modbus Master) is automatically re-established.
r0980[0...99] List of available
parameter numbers
- - - - - U16 4
Contains 100 parameter numbers index 0 - 99.
Index: [0] Parameter 1
[1] Parameter 2
... ...
[9] Parameter 10
Note: The parameter list array has 2 elements to reduce memory consumption. On each access to an element
index 0 - 99, the individual result is determined dynamically by the 'BeforeAccess' function. The last
element contains the number of the following parameter array, 0 indicates end of list.
r0981[0...99] List of available
parameter numbers
- - - - - U16 4
Contains 100 parameter numbers index 100 - 199.
Index: See r0980
Note: See r0980
r0982[0...99] List of available
parameter numbers
- - - - - U16 4
Contains 100 parameter numbers index 200 - 299.
Index: See r0980
Note: See r0980
r0983[0...99] List of available
parameter numbers
- - - - - U16 4
Contains 100 parameter numbers index 300 - 399.
Index: See r0980
Note: See r0980
r0984[0...99] List of available
parameter numbers
- - - - - U16 4
Contains 100 parameter numbers index 400 - 499.
Index: See r0980
Note: See r0980
r0985[0...99] List of available
parameter numbers
- - - - - U16 4
Contains 100 parameter numbers index 500 - 599.
Index: See r0980
Note: See r0980
r0986[0...99] List of available
parameter numbers
- - - - - U16 4
Contains 100 parameter numbers index 600 - 699.
Index: See r0980
Note: See r0980

Siemens SINAMICS V20 Series Specifications

General

Brand	Siemens
Model	SINAMICS V20 Series
Category	DC Drives
Language	English