Siemens SINAMICS V20 - Page 20

SINAMICS V20 Inverter
20 A5E37281078-003, 05/2016
Cn009 - PID control with the fixed value reference
Cn010 - USS control
Cn011 - MODBUS RTU control
Parameters for setting the connections macros
Description
Default values for connection macros (Cn...)
001
002
003
004
005
006
007
008
009
010
011
P0700[0] Selection of command source 1 2 2 2 2 2 2 2 2 5 5
P0701[0] Function of digital input 1 - 1 1 15 1 2 1 1 1 - -
P0702[0] Function of digital input 2 - 12 15 16 15 1 2 - 15 - -
P0703[0] Function of digital input 3 - 9 16 17 16 13 12 9 16 - -
P0704[0] Function of digital input 4 - 10 17 18 9 14 9 - 17 - -
P0727[0] Selection of 2/3-wire method - - - - - 3 2 - - - -
P0731[0] BI: Function of digital output 1 52.2 52.2 52.2 52.2 52.2 52.2 52.2 52.2 - - -
P0732[0] BI: Function of digital output 2 52.3 52.3 52.3 52.3 52.3 52.3 52.3 52.3 - - -
P0756[1] Type of analog input - - - - - - - 2 - - -
P0771[0] CI: Analog output 21 21 21 21 21 21 21 21 - - -
P0810[0] BI: CDS bit 0 (Hand/Auto) 0 - - - - - - - - - -
P0840[0] BI: ON/OFF1 - - - 1025.0 - - - - - - -
P1000[0] Selection of frequency 1 2 3 3 23 1 2 - - 5 5
P1001[0] Fixed frequency 1 - - 10 - 10 - - - - - -
P1002[0] Fixed frequency 2 - - 15 - 15 - - - - - -
P1003[0] Fixed frequency 3 - - 25 - - - - - - - -
P1016[0] Fixed frequency mode - - 1 2 1 - - - - - -
P1020[0] BI: Fixed frequency selection bit 0 - - 722.1 722.0 722.1 - - - - - -
P1021[0] BI: Fixed frequency selection bit 1 - - 722.2 722.1 722.2 - - - - - -
P1022[0] BI: Fixed frequency selection bit 2 - - 722.3 722.2 - - - - - - -
P1023[0] BI: Fixed frequency selection bit 3 - - - 722.3 - - - - - - -
P1040[0] Setpoint of the MOP - - - - - 0 - - - - -