Controlled Power Module (CPM60.1)
16 A5E03975175-002, 04/2014
Connecting the drive with the SIMATIC PLC
When using the drive together with the SIMATIC PLC, you are recommended to use a standard 24 V DC power supply for
the SIMATIC PLC and use a Siemens cable (6ES7298-2DS23-0XA0) to connect the two ones.
● If the SIMATIC PLC is an S7-200 controller, see the following wiring diagrams:
●For PNP types (example)
●For NPN types (example)
To Next Page
Loading...
