Siemens SINAMICS V60 - Installation; Mechanical Installation

Controlled Power Module (CPM60.1)
12 A5E03975175-002, 04/2014
Recommended transformer type
380 V/220 V SG series 3AC isolating transformer
7.7 Nm + 10 Nm
2.5 kVA
10 Nm + 10 Nm
3.0 kVA
4 Nm + 4 Nm + 4 Nm
1.5 kVA
4 Nm + 4 Nm + 6 Nm
1.5 kVA
4 Nm + 4 Nm + 7.7 Nm
2.1 kVA
4 Nm + 4 Nm + 10 Nm
2.0 kVA
4 Nm + 6 Nm + 6 Nm
2.0 kVA
4 Nm + 6 Nm + 7.7 Nm
2.0 kVA
4 Nm + 6 Nm + 10 Nm
2.5 kVA
4 Nm + 7.7 Nm + 7.7 Nm
2.5 kVA
4 Nm + 7.7 Nm + 10 Nm
2.5 kVA
4 Nm + 10 Nm + 10 Nm
3.0 kVA
6 Nm + 6 Nm + 6 Nm
2.0 kVA
6 Nm + 6 Nm + 7.7 Nm
2.0 kVA
6 Nm + 6 Nm + 10 Nm
2.5 kVA
6 Nm + 7.7 Nm + 7.7 Nm
2.5 kVA
6 Nm + 7.7 Nm + 10 Nm
2.5 kVA
6 Nm + 10 Nm + 10 Nm
3.0 kVA
7.7 Nm + 7.7 Nm + 7.7 Nm
2.5 kVA
7.7 Nm + 7.7 Nm + 10 Nm
3.0 kVA
7.7 Nm + 10 Nm + 10 Nm
3.0 kVA
10 Nm + 10 Nm + 10 Nm
3.5 kVA
CAUTION
Use of an appropriate isolating transformer
To reduce the risk of electric shock, interference from power supply and electromagnetic field, an isolating transformer is
necessary for the 3AC 380V mains system.
The customer may select the right transformer with reference to the table above (Determine the right transformer power
based on desired motor combinations)
2
Installation
2.1
Mechanical installation
2.1.1
Mounting the drive
Drill pattern and outline dimensions