SINUMERIK 802D sl pro - Milling
Control system overview for machine tools' sales people, 07/2008
11
Setup functions
3
3.1 Work offsets
☑ Basic configuration
Within the SINUMERIK 802D sl pro, the following adjustable work offsets are available:
● A permanently effective basic offset (G500)
● Six other work offsets (G54-G59)
Graphical interface support is provided for the purpose of adjusting workpiece zeros. This
means that you can switch directly between the measure workpiece screens and work offset
list.
Highlights
● Easy setup of different workpieces using graphical guidance
● Clear overview of all work offsets
To Next Page
Loading...
