To Next Page

To Previous Page

Program management and user memory

4.2 User memory and data management

SINUMERIK 802D sl pro - Milling

Control system overview for machine tools' sales people, 07/2008

4.2.3 Slot for USB stick

☑ Basic configuration, only USB stick required

In the SINUMERIK 802D sl, a slot is reserved for a USB stick.

• USB stick can be inserted or removed during

operation, i.e., the machine does not have to

be restarted in order for the USB stick to be

recognized.

• Load and execute part programs from the

USB stick

• No loss in speed during execution of part

programs from the USB stick (DNC

operation)

• No special software necessary for

reading/writing the USB stick via PC

Part programs on the USB stick are not edited via controller, but rather via PC.

Highlight

● Efficient and reliable solution for handling a large volume of user data

● Freedom in the selection of the mass storage device

4.2.4 Serial data transfer

☑ Basic configuration, installation of RCS802 tool on PC

(included on Toolbox CD as standard)

The SINUMERIK 802D sl pro facilitates easy data transfer from and to PCs via the RS232

interface. To do this, install the RCS802 tool on your PC.

• Backing up of machine data

• Archive/series startup file

• Backing up of part program data

Note: If you have not received the Toolbox CD, please consult your machine OEM.

Highlight

● Easy data transfer with a proven track record

Siemens SINUMERIK 802D sl Operator's Manual

Other manuals for Siemens SINUMERIK 802D sl