Programming
5.3 Machining Cycles
SINUMERIK 802D sl pro - Milling
Control system overview for machine tools' sales people, 07/2008
23
5.3 Machining Cycles
☑ Basic configuration
In the case of recurring machining operations, the SINUMERIK 802D sl pro provides you
with graphical support for the following technology canned cycles. You can parameterize
these and assemble them for the program in any way you wish.
• Milling
– Face milling
– Contour milling
– Rectangular pocket and spigot,
circular pocket and spigot
– Elongated holes on a circle, slots on a
circle, circumferential slots
– Thread milling (inside and outside)
• Drilling
– Centering, drilling, counter-boring,
reaming, deep-hole drilling, tapping
– Repetition of hole machining using
hole patterns row/circle (MCALL)
Comprehensive functional and graphical
support is provided:
• During parameterization, support is
provided by the clear pictures and
infotexts accompanying the parameters,
e.g. finishing allowance in depth.
• A comprehensive range of choices is
available for effective machining, such as
helical insertion for rectangular and
circular pockets.
• Thread milling, including helical
interpolation of all three geometry axes
X, Y and Z, is contained within the basic
configuration.
Highlight
● Graphical cycle support helps you create your part program faster
● Highly flexible G-code programming extended by graphical cycles
To Next Page
Loading...
