Siemens SINUMERIK 840D sl System Manual

Tap and hold using 2 fingers
● Open cycles line by line to change (without input screen
form)
Tap with two index fingers
● Tap with two fingers simultaneously in the lower right and
left-hand corners of the panel to open the TCU menu.
The menu has to be opened for service purposes.
Note
Flicking gestures with several fingers
The gestures only function reliably if you hold the fingers sufficiently far apart. The fingers
should be at least 1 cm apart.
Multitouch operation with SINUMERIK Operate
3.3 Operating with finger gestures
Smart machine tool operation
System Manual, 12/2017, 6FC5397-7FP40-0BA0 17

Siemens SINUMERIK 840D sl Specifications

General

Control Type	CNC
Number of Axes	Up to 31
Max Number of Channels	10
Interfaces	Ethernet, PROFIBUS, PROFINET, USB
Interpolation	5-axis interpolation
Operating Temperature	0°C to 45°C
Relative Humidity	Up to 95% (non-condensing)
Display	TFT color display, various sizes
Programming Languages	DIN/ISO
Safety Features	Safety Integrated
PLC	Integrated PLC S7-300
Drive Interface	SINAMICS S120
Data Storage	CF card, USB
Operating System	Windows-based