Operator control Function
Virtual keyboard
Displays a QWERTY keyboard in the display area for applications as well
as in the 4th display area below SINUMERIK Operate.
If the virtual keyboard is selected while the maximum representation of the
display area is active, the keyboard opens as a pop-up. The keyboard can
be moved as required on the display by means of touch operation.
Maximizing the display area
Enlarges the area with the SINUMERIK Operate and the area for the ap‐
plications to the full extent of the panel.
Minimizing the display area
The area with the SINUMERIK Operate and the area for the applications
are reduced back to their original size.
Machine Control Panel
Shows a machine control panel.
Note:
Please observe the information provided by the machine manufacturer.
SINUMERIK Operate expansion using a sidescreen
4.8 SINUMERIK Operate Display Manager
Smart machine tool operation
System Manual, 12/2017, 6FC5397-7FP40-0BA0 29
To Next Page
Loading...
