Siemens SiPass integrated

FLN Devices and Readers
ADD5100 Dual Reader Interface (DRI)
3
32 | 38
A6V11164550
3 FLN Devices and Readers
3.1 ADD5100 Dual Reader Interface (DRI)
The ADD5100 is programmed using FLN Configuration tool in SiPass integrated
Configuration Client or using the stand-alone ACC & FLN Field Service Tool
application. See the respective User Guide for more Information.
3.2 ADE5300 Eight Reader Interface (ERI)
The ADE5300 is programmed using FLN Configuration tool in SiPass integrated
Configuration Client or using the stand-alone ACC & FLN Field Service Tool
application. See the appropriate User Guide for more information.
3.3 ADS5200, ADS5210 Single Reader Interface (SRI)
The ADS5200 is programmed using the FLN Configuration tool in SiPass
integrated Configuration Client or using the stand-alone ACC & FLN Field Service
Tool application. See the respective User Guide for more Information
3.4 AFI5100 (IPM)
The AFI5100 is programmed using FLN Configuration tool in SiPass integrated
Configuration Client or using the stand-alone ACC & FLN Field Service Tool
application. See the appropriate User Guide for more Information.
3.5 AFO5100 (OPM)
The AFO5100 is programmed using FLN Configuration tool in SiPass integrated
Configuration Client or using the stand-alone ACC & FLN Field Service Tool
application. See the appropriate User Guide for more Information.
3.6 AFO5200 (8IO)
The AFO5200 is programmed using FLN Configuration tool in SiPass integrated
Configuration Client or using the stand-alone ACC & FLN Field Service Tool
application. See the appropriate User Manual for more information.
3.7 ATI5100 (IAT)
The ATI5100 is programmed using FLN Configuration tool in SiPass integrated
Configuration Client or using the stand-alone ACC & FLN Field Service Tool
application. See the appropriate User Manual for more information.
3.8 OSDP Reader Devices
With SiPass integrated MP2.76 onward, you get the support for connecting OSDP
Reader Devices directly to controller FLN (for ACC-G1 and ACC-G2 only). The
OSDP Reader devices are programmed using FLN Configuration tool in SiPass
integrated Configuration Client.
OSDP Reader can be logically linked/unlinked to any existing ERI, DRI or SRI (on
the same ACC unit) to act as a Replacement Reader in case when encrypted
reader communications are required.
For more information, see the Configuration ClientUser Guide in
SiPass integrated software bundle.