A Appendix
640
7SD5 Manual
C53000-G1176-C169-1
5 >Reset LED (>Reset LED) Device SP * * * LED BI BO
7 >Setting Group Select Bit 0 (>Set
Group Bit0)
Change Group SP * * * LED BI BO
8 >Setting Group Select Bit 1 (>Set
Group Bit1)
Change Group SP * * * LED BI BO
11 >User defined annunciation 1
(>Annunc. 1)
Device SP * * * * LED BI BO 192 27 1 Yes
12 >User defined annunciation 2
(>Annunc. 2)
Device SP * * * * LED BI BO 192 28 1 Yes
13 >User defined annunciation 3
(>Annunc. 3)
Device SP * * * * LED BI BO 192 29 1 Yes
14 >User defined annunciation 4
(>Annunc. 4)
Device SP * * * * LED BI BO 192 30 1 Yes
15 >Test mode (>Test mode) Device SP ON
OFF
* * LED BI BO 135 53 1 Yes
16 >Stop data transmission
(>DataStop)
Device SP * * * LED BI BO 135 54 1 Yes
51 Device is Operational and Pro-
tecting (Device OK)
Device OUT ON
OFF
* * LED BO 135 81 1 Yes
52 At Least 1 Protection Funct. is
Active (ProtActive)
Device IntSP ON
OFF
* * LED BO 192 18 1 Yes
55 Reset Device (Reset Device) Device OUT * * * LED BO 192 4 1 No
56 Initial Start of Device (Initial Start) Device OUT ON * * LED BO 192 5 1 No
60 Reset LED (Reset LED) Device OUT_
Ev
ON * * LED BO 192 19 1 No
67 Resume (Resume) Device OUT ON * * LED BO 135 97 1 No
68 Clock Synchronization Error
(Clock SyncError)
Device OUT ON
OFF
**LEDBO
69 Daylight Saving Time (DayLight-
SavTime)
Device OUT ON
OFF
**LEDBO
70 Setting calculation is running
(Settings Calc.)
Device OUT ON
OFF
* * LED BO 192 22 1 Yes
71 Settings Check (Settings Check) Device OUT * * * LED BO
72 Level-2 change (Level-2 change) Device OUT ON
OFF
**LEDBO
73 Local setting change (Local
change)
Device OUT * *
110 Event lost (Event Lost) Device OUT_
Ev
ON * * LED BO 135 130 1 No
113 Flag Lost (Flag Lost) Device OUT ON * m LED BO 135 136 1 Yes
125 Chatter ON (Chatter ON) Device OUT ON
OFF
* * LED BO 135 145 1 Yes
126 Protection ON/OFF (via system
port) (ProtON/OFF)
Device IntSP ON
OFF
**LEDBO
127 Auto Reclose ON/OFF (via
system port) (AR ON/OFF)
Auto Reclose IntSP ON
OFF
**LEDBO
128 Teleprot. ON/OFF (via system
port) (TelepONoff)
Device IntSP ON
OFF
**LEDBO
140 Error with a summary alarm
(Error Sum Alarm)
Device OUT ON
OFF
* * LED BO 192 47 1 Yes
144 Error 5V (Error 5V) Device OUT ON
OFF
* * LED BO 135 164 1 Yes
160 Alarm Summary Event (Alarm
Sum Event)
Device OUT * * * LED BO 192 46 1 Yes
No. Description Function Type
of In-
for-
matio
n
Log Buffers Configurable in Matrix IEC 60870-5-103
Event Log ON/OFF
Trip (Fault) Log ON/OFF
Ground Fault Log ON/OFF
Marked in Oscill. Record
LED
Binary Input
Function Key
Relay
Chatter Suppression
Type
Information Number
Data Unit
General Interrogation
www . ElectricalPartManuals . com
To Next Page
Loading...
Need help?
General