Siemens SITRANS F US SONOFLO SONO 3000 - Location of the SENSORPROM Flow Memory Unit, Remote Mounting; Signal Converter SONO 3000 Ex-D

32 SFIDK.PS.029.Q3.02
Signal conv. inst.
5. Signal converter installation
SITRANS F US SONOFLO
®®
®®
®
Location of the SENSORPROM
®®
®®
®
unit.
4. Take the SENSORPROM
®
unit out of the antistatic bag.
5. Place the SENSORPROM
®
unit at the bottom of the housing.
6. Replace the electronic unit and make sure that the two screws are tightened firmly.
7. Replace the backplate and make sure that the plate is fixed with a torque of at least 5 Nm.
5.12.14 Signal converter
SONO 3000 Ex-d
Ex-d in separate version
Weight: Ex-d in separate version approx. 11 kg
5.12.13 Location of the
SENSORPROM
®®
®®
®
flow memory unit,
remote mounting