Siemens SITRANS FS230 - Safety notes; Preconditions for use; Warning symbols on the device

SITRANS FS230
A5E38755607-AA, 02/2017
9
Figure 3-4 Termination/configuration overview (HART)
3.4
Incorrect mounting
NOTICE
Incorrect mounting
The device can be damaged, destroyed, or its functionality impaired through improper mounting.
• Before installing ensure there is no visible damage to the device.
•
Mount the device using suitable tools. See operating instructions.
CAUTION
Loss of type of protection
Damage to device if the enclosure is open or not properly closed. The type of protection specified on the nameplate or in
Technical data (Page 21) is no longer guaranteed.
•
Make sure that the device is securely closed.
3.5
Disassembly
WARNING
Incorrect disassembly
The following risks may result through incorrect disassembly:
- Injury through electric shock
- Risk through emerging media when connected to the process
- Risk of explosion in hazardous area
In order to disassemble correctly, observe the following:
• Before starting work, make sure that you have switched off all physical variables such as pressure, temperature,
electricity etc. or that they have a harmless value.
• If the device contains hazardous media, it must be emptied prior to disassembly. Make sure that no environmentally
hazardous media are released.
•
Secure the remaining connections so that no damage can result if the process is started unintentionally.