Siemens SITRANS FS230 - Installation location requirements

SITRANS FS230
A5E38755607-AA, 02/2017
17
①
Wall mounted transmitter
③
Flow direction
②
Upstream sensor cable to transmitter port
(1A) Path 1
④
Ltn (spacing distance between sensors)
⑤
Downstream sensor cable to transmitter port (1B) Path 1
Figure 4-4 HI Precision Direct mount Dual enclosure sensor wiring
5. Tighten all cable glands to obtain optimum sealing.
6. Refer to transmitter FST030 Operating Instructions to program transmitter.