Siemens SITRANS LVS100 - Alarm Output

Page EN-6 SITRANS LVS100/200 – INSTRUCTION MANUAL 7ML19985FT63
mmmmm
English
Maximum particle size
• LVS100 8 mm (0.32")
• LVS200 10 mm (0.39")
Alarm Output
LVS100
• version with 2 relays DPDT relay
relay fail-safe: high or low,
switch selectable
relay 8 A at 250 V AC,
non-inductive / relay 5 A at 30 V DC,
non-inductive
LVS200
• version with 1 relay SPDT relay
relay fail-safe: high or low,
switch selectable
relay 8 A at 250 V AC,
non-inductive / relay 5 A at 30 V DC,
non-inductive
• version with 2 relays DPDT relay
relay fail-safe: high or low,
switch selectable
relay 8 A at 250 V AC,
non-inductive / relay 5 A at 30 V DC,
non-inductive
• 3-wire PNP open collector: permanent load
maximum 0.4 A, short circuit and
overload protected;
turn-on voltage: max. 50 V (reverse
protection)
• mA output (build-up detection) 8/16 mA or 4 to 20 mA;
resolution 4 to 20 mA, ±0.1 mA