7ML19985FT63 SITRANS LVS100/200 – INSTRUCTION MANUAL Page EN-7
mmmmm
English
Mechanical
Process Connection
LVS100
• thread R 1½" (BSPT); 1¼" NPT (Taper)
ANSI B 1.20.1
• thread material stainless steel 316 Ti (1.4581) or
304 (1.4301) for specific configurations
LVS200
• thread 1½” NPT (Taper), R 1½” (BSPT)
• thread material stainless steel 304 (1.4301) or
optional stainless steel 316 Ti (1.4571)/
316L (1.4404)
• flanges DN 100 PN6, DN 100 PN16,
2", 3", 4" ASME 150 lb flanges
• optional sliding bushing with R 2" (BSPT) or NPT (Taper) thread
• Tri-clamp 2" (DN50) ISO 2852
Tines
• tine material stainless steel 316Ti (1.4571)/ 316L (1.4581)
(PTFE
1
coated tines are available upon special request. Contact your local Siemens
representative for ordering information.)
Enclosure
• construction epoxy-coated aluminum
• conduit entry 2 x M20x1.5, or 2 x ½” NPT
• ingress protection Type 4X/NEMA 4X/IP66
Weight
• standard version, no extensions 2.0 kg (4.4 lb)
• solids/liquids, no extensions 1.9 kg (4.2 lb)
Environmental
• location indoor/outdoor
• altitude max. 2000 m (6562 ft)
• ambient temperature –40 to +60 °C (–40 to +140 °F)
• relative humidity 0 to 100% (suitable for outdoor: ingress
protection: Type 4X/NEMA 4X/IP66)
• overvoltage category II
• pollution degree 2
1.
Polytetrafluoroethylene
To Next Page
Loading...
