7ML19985JB02 SITRANS Probe LU (PROFIBUS PA) – INSTRUCTION MANUAL Page 9
mmmmm
Specifications
Environmental
• location indoor/outdoor
• altitude 5000 m (16,404 ft) max.
• ambient temperature −40 to +80 °C (−40 to +176 °F)
• relative humidity suitable for outdoor
(Type 4X/NEMA 4X, Type 6 /NEMA 6, IP67, IP68
enclosure)
• installation category I
• pollution degree 4
• pressure rating 0.5 bar g/7.25 psi g
Process
•temperature
(at flange or threads) −40 to +85 °C (−40 to +185 °F)
• pressure (vessel) 0.5 bar g/7.25 psi g
Approvals (verify against device nameplate)
•General CSA
US/C
, FM, CE, C-TICK
• Hazardous Intrinsically Safe: (Europe) ATEX II 1 G EEx ia IIC T4
(US/Canada) FM/CSA
1
: barrier required
Class I, Div. 1, Groups A, B, C, D
Class II, Div. 1, Groups E, F, G
Class III T4
Non-incendive: (US) FM
2
:
Class I, Div. 2, Groups A,B, C, D T5
Notes:
• Please check the ambient and operating temperatures above;
Process
below; and
Approvals (verify against device nameplate)
below, for the specific configuration you
are about to use or install.
• The use of approved watertight conduit hubs/glands is required for Type 4X/NEMA 4X,
Type 6/NEMA 6, IP67, IP68 (outdoor application).
1.
See
Intrinsically Safe wiring drawing (FM/CSA)
on page 107 for drawing number 23650617.
2.
See
Non-incendive (FM Class I, Div. 2) wiring drawing
on page 111 for drawing number 23650583.
To Next Page
Loading...
