Application planning
3.2 Network and system integration
SITRANS SL
32 Operating Instructions, 12/2010, A5E01132948-04
3.2 Network and system integration
3.2.1 Overview
The communication interface of SITRANS SL can be configured for transfer and processing
of the measurement data as follows:
● Analog I/O and digital I/O system configuration;
● PROFIBUS DP system configuration;
● Modbus system configuration.
The system configuration of the SITRANS SL is defined according to the communication
code within its order number.
Note
Setup of the SITRANS SL can be done via the local user interface LUI, or for service
engineers, via the LDSComm software. LDSComm communicates with SITRANS SL via
Ethernet using the TCP/IP protocol. The connection can be established locally or via modem
dial-in using the remote service kit which is available as accessory.
See also
Cable selection recommendations (Page 31)
To Next Page
Loading...
