Installing
4.4 Alignment of SITRANS SL
SITRANS SL
58 Operating Instructions, 12/2010, A5E01132948-04
4.4.1 Alignment kit
Note
The alignment kit is not part of the delivery. If you commission the analyzer yourself, you
need to order the alignment kit additionally.
The alignment kit is necessary to align SITRANS SL. It consists of:
● a light source
● an alignment tool consisting of
– aiming tool base
– fine aligning unit
● an coarse alignment unit
● a lens hood
● an Allen key for the alignment of the sensors
● two wrenches to secure/release the clamp ring:
– one for the clamp ring,
– one to prevent the adapter on the process interface to get loose when the clamp ring
is secured
● a tube of lubricant for the threads to prevent them form getting stuck.
① Thread lubricant ⑤ 4 Batteries LR 6 1.5 V
② Alignment tool ⑥ Allen key
③ Hook wrenches ⑦ Coarse alignment unit
④ Light source ⑧ Lens hood
Figure 4-14 Alignment kit
See also
Accessories (Page 193)
To Next Page
Loading...
