Commissioning
6.3 PROFIBUS configuration for SITRANS SL
SITRANS SL
Operating Instructions, 12/2010, A5E01132948-04
101
6.3.8 Hardware configuration
Creating PROFIBUS Network
Procedure:
1. Double click on "Hardware" for opening "HW Config" in the selection list on the left hand
side of the project window SIMATIC 300 Station.
2. In the selection list mark "(0)UR" DP item.
3. Click with the right mouse button on the DP item and then click on "Add Master System".
To Next Page
Loading...
