Siemens SL75 - Page 78

Settings78
© Siemens AG 2003, E:\Auftrag\Siemens\MobilePhones\FCCs\sl75\FUG\HYDRA_Connectivity.fm
left page (78) of SL75 Hydra FUG, w/o ptt, us-en, A31008-H3300-A1-1-7619 (06.10.2005, 15:39)
Template: X75, Version 2.2;VAR Language: am; VAR issue date: 050822
Online settings
Default setting and activation of
the connection profiles for data
transmission.
The phone default setting varies
from service provider to service
provider:
• The settings have already been
implemented by the service pro-
vider. You can start immediately.
• Access profiles have already been
created by your service provider.
Then select profile and activate.
• The access profiles must be con-
figured manually. In this case, you
will receive the necessary data
from the service provider or visit:
www.siemens.com/
mobilephonescustomercare
Selecting profile
F
Select the profile.
ì
Confirm selection.
Fax/data
Send voice/fax b
Set this function on the phone before
transmission so that you can switch
from voice mode to fax mode.
Rcve fax/data
b
Your service provider has given you
a number for telephoning and a fax/
data number.
The call is signalled by a special ring-
tone and the type of call (fax or data)
is displayed. Now start the commu-
nication program in your PC to
receive the fax/data.