4 When prompted, press the Start key on the CT control box.
After the checkup, the entire system is ready for operation.
• In case of emergency, you can skip the checkup procedure by
clicking Cancel. The image quality, however, may be less than
optimal. The checkup must then be performed as soon as possible.
• For the purpose of viewing and evaluating images only, you can
turn on/off a
syngo
Workplace computer individually.
Starting up the system 3
SOMATOM Scope |
syngo
CT VC50
Print No. HC-C2-015-G.626.08.01.02
25
To Next Page
Loading...
