Related documents such as the environmental declarations, CE declarations, etc., can be
downloaded from the following Internet address:
www.siemens.com/bt/download
Notes
Engineering
The actuators must be electrically connected in accordance with local regulations (see
"Connection diagrams [▶ 14]”).
National safety regulations
Failure to comply with national safety regulations may result in personal injury and property
damage.
● Observe national provisions and comply with the appropriate safety regulations.
Observe permissible temperatures (see "Technical data [▶ 10]").
Mounting
● Do not use pipe wrenches, pliers or similar tools.
● Avoid lateral pressure or (cable) tension on the mounted actuator!
Valve and actuator are easy to assemble on site before commissioning:
● Remove protective cover from the valve body.
● Position the actuator and tighten the connection nut manually.
● See "Mounting instruction" for graphical instructions.
Orientation
Commissioning
When commissioning, check both wiring and functioning of the actuator.
Normally open valve closes, normally closed valve opens
Normally open valve opens, normally closed valve closes
The actuator must be commissioned only with a correctly mounted valve in place!
To Next Page
Loading...
