Siemens UL 489 - Circuit Breaker Packing and Lifting Procedures; Unpacking and Weights

4 – 1
4 Packing and Lifting
4.1 Unpacking
Unpack the circuit breaker and inspect it for damage.
If the circuit breaker or cradle is to be installed at a later date:
they may only be stored and redispatched in the original packing.
4.2 Weights
NOTICE
Equipment Damage.
Placing the circuit breaker on its rear side may cause damage to the finger cluster assemblies.
When handling circuit breakers, do not place them on their rear side.
Frame Size
Weight
Fixed-mounted
circuit breaker
Draw-out circuit breaker Cradle Circuit breaker + Cradle
I 800 A / 1200 A 86 lb 137 lb 108 lb Only lift separately
II 800 A / 1200 A 124 lb 159 lb 112 lb Only lift separately
II 1600 A 124 lb 159 lb 112 lb Only lift separately
II 2000 A 130 lb 177 lb 128 lb Only lift separately
II 2500 A / 3000 A 141 lb 209 lb 152 lb Only lift separately
II C-class 148 lb 220 lb 163 lb Only lift separately
III 181 lb 260 lb 306 lb Only lift separately
III C-class 200 lb 278 lb 306 lb Only lift separately