26 – 1
26 Disposal
26.1 Low-voltage circuit breakers disposal
Siemens circuit breakers are environmentally friendly products, predominantly consisting of recyclable materials. For disposal, some disas-
sembly, separation, and professional-services handling may be required.
Materials to be handled include but are not limited to:
- Metals:Should be transferred and recycled as mixed scrap metals.
- Plastics:Plastic containing a recycle symbol should be recycled. Plastic lacking the recycle symbol should be discarded as indus-
trial waste.
- Small electronics, insulated cables, and motors: Should be recycled via electronics scrap disposal companies specialized in
separating and sorting as described above.
Disposal regulations vary from locality to locality and may be modified over time. Specific regulations and guidelines should be verified at
the time of waste processing to ensure that current requirements are being fulfilled. For specific assistance in understanding and applying
regional regulations and policies, or manufacturer’s recommendations, refer to the local Siemens service representative for additional
information.
WARNING
Stored energy.
Can cause death or serious injury.
Mechanisms contain stored energy, which may be released during disassembly.
Wear suitable protection and take appropriate precautions when disconnecting and removing parts.
WARNING
Heavy objects.
Can cause death or serious injury.
Disassembly may cause an unbalanced load, and could result in falling objects.
Take appropriate precautions in a properly designated workspace to maximize support and stability.
To Next Page
Loading...
