9 – 21
Menu structure ETU745
After the supply voltage has been applied, the display changes from "Power-up screen" to "Autoscroll" mode after about 5 sec. Thereafter,
further modes can be accessed by means of the two buttons.
Overview
"Autoscroll" mode
During normal operation, the display is in "Autoscroll" mode
In this mode, the display automatically changes to the next screen every 5 seconds.
If there is no metering module installed, the display changes continuously back and forth between screens 1 and 2.
If there is a metering module installed, a total of five screens are displayed in "Autoscroll" mode.
To access "Autoscroll" mode, press the following button(s)
In "Fixed screen display" mode
In "Tripping counter reset" mode
In "Contrast setting" mode
In "Parameter setting" mode Do not press any button for 10 seconds
In "Tripping info" mode
Start
Power-up-screen
Mode "Autoscroll"
Mode "Parameter setting"
Mode "Contrast setting"
Mode
"Fixed screen display"
5s
10 s
0483_u
++
To Next Page
Loading...
