9 – 64
9.2.2.3 COM35 module
The COM35 communications module permits access to the circuit breaker via the fieldbus protocols PROFINET IO and Modbus TCP.
The COM35 also features:
- Ethernet switch functionality
- Both protocols may be used simultaneously on both ports
- Dynamic Arc Sentry (DAS) via the COM35 inputs and outputs
- Signed firmware update
- Tripped signal (bell alarm) via the COM35 output
(1) Input/output terminals for user connection to additional functions
(2) RJ45 sockets for PROFINET IO and Modbus TCP connection
(3) Function-select button
(4) Activity LED PROFINET IO
(5) Activity LED Modbus TCP
(6) Activity LED c
(7) Connections to the secondary disconnect contact system X8
(8) cconnection for connecting external cmodules or a cterminating resistor
Note
The COM35 module can be specified as part of the circuit
breaker catalog number or ordered separately:
WLCOM35: Includes COM35 module and mounting hardware.
WLCOM35RET: Retrofit kit including COM35, BSS and all
required components to retrofit communications into a breaker.
To Next Page
Loading...
