15 – 22
Field installation of sealing cover
- OPEN the circuit breaker and discharge the closing spring (page 24-2)
- Move the circuit breaker into the withdrawn position in the cradle (page 24-3)
- Remove front panel (page 24-4)
See also Limiting Access to OPEN/CLOSE Buttons (page 14-1)
Then:
- Install front panel (page 24-4)
DANGER
Hazardous voltage.
Will cause death, serious personal injury, or equipment damage.
Turn off and lock out all power supplying this equipment before working on this device.
WARNING
High speed moving parts.
Can cause serious personal injury.
Discharge the closing spring before inspection and before carrying out any work on the circuit breaker.
NOTICE
Damage to accessory.
Over-tightening the mounting screws may strip the plastic frame, or damage components, rendering the accessory unusable.
Hardware shall be tightened carefully until the underside of the screw head is flush with the mounting surface.
Padlock Locking device Catalog No.
CLOSE/OPEN Padlock Kit WLLKKT
OPEN
CLOSE
3
2
1
PZ 1
hand tighten
To Next Page
Loading...
