Need help?Do you have a question about the SIGLENT SPD3303X-E and is the answer not in the manual?
General| Output Channels | 3 |
|---|---|
| Channel 1 Output Voltage | 0-32V |
| Channel 1 Output Current | 0-3.2A |
| Channel 2 Output Voltage | 0-32V |
| Channel 2 Output Current | 0-3.2A |
| Total Power | 220W |
| Voltage Resolution | 10 mV |
| Current Resolution | 10 mA |
| Protections | OVP, OCP, OTP |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -20°C to 70°C |
| Channel 3 Output Voltage | 2.5V/3.3V/5V |
| Interface | USB |
| Display Type | 4.3 inch TFT-LCD display |
| Ripple and Noise | < 350 uVrms/3 mVpp |
Defines safety terms (DANGER, WARNING, CAUTION) and explains product safety symbols.
Procedures for inspecting the instrument upon arrival and performing initial safety checks.
Explanation of front panel buttons, controls, and parameter setting operations.
Procedure for verifying voltage and current output functionality.
How to view version details and upgrade the instrument's firmware.
Explains the rules and formats for writing SCPI commands.
To Next Page
