SIGLENT SSA3000X Series User Manual

SIGLENT
SSA3000X User Manual 44
3. M -> Start Freq
Set the start frequency of the analyzer to the frequency of the current marker.
 If Normal marker is selected, the start frequency will be set to the frequency of the current
marker.
 If Delta or Delta Pair marker is selected, the start frequency will be set to the frequency of the
Delta Marker.
 The function is invalid in Zero span mode.
4. M -> Stop Freq
Set the stop frequency of the analyzer to the frequency of the current marker.
 If Normal marker is selected, the stop frequency will be set to the frequency of the current
marker.
 If Delta or Delta Pair marker is selected, the stop frequency will be set to the frequency of the
Delta Marker.
 The function is invalid in Zero span mode.
5. M ->Ref Level
Set the reference level of the analyzer to the amplitude of the current marker.
 If Normal marker is selected, the reference level will be set to the amplitude of the current
marker.
 If Delta or Delta Pair marker is selected, the reference level will be set to the amplitude of the
Delta Marker.
6. ΔM->Span
Set the span of the analyzer to the frequency difference between the two markers in Delta, or
Delta Pair marker type.
 If Normal marker is selected, this function is invalid.
 The function is invalid in Zero span mode.
7. ΔM->CF
Set the center frequency of the analyzer to the frequency difference between the two markers in
Delta, or Delta Pair, marker type.
 If Normal marker is selected, this function is invalid.
 The function is invalid in Zero span mode.
2.3.3 Marker Fn
Special marker functions including Noise Marker, N dB BW and Freq Counter.

SIGLENT SSA3000X Series Specifications

General

Brand	SIGLENT
Model	SSA3000X Series
Category	Measuring Instruments
Language	English