Need help?Do you have a question about the SIGLENT SSA3021X and is the answer not in the manual?
General| Frequency Range | 9 kHz to 2.1 GHz |
|---|---|
| Resolution Bandwidth (RBW) | 1 Hz to 1 MHz |
| Sweep Time | 1 ms to 1000 s |
| Input Impedance | 50 Ω |
| Input VSWR | < 1.5 |
| Maximum Input Level | +30 dBm |
| Tracking Generator | Optional |
| Displayed Average Noise Level (DANL) | -161 dBm/Hz |
| Interfaces | USB Host, USB Device, LAN, GPIB (optional) |
| Display Resolution | 1024 points |
| Power Requirements | 100 V - 240 V AC, 50 Hz/60 Hz |
| Phase Noise | -98 dBc/Hz @ 10 kHz offset (1 GHz carrier) |
Key precautions to avoid personal injury or instrument damage.
Guidelines for safe power connection, grounding, and operation.
Precautions for environment, covers, fuses, and wet conditions.
Details on various measurement types like Channel Power, ACPR, OBW, and T-Power.
Connecting the analyzer via USB and LAN for remote control.
Steps for establishing communication using VISA, Sockets, and Telnet protocols.
Instructions for controlling the analyzer remotely via NI MAX software using SCPI commands.
Guidance on diagnosing and resolving common instrument problems and error messages.
To Next Page
