SIGLENT SSA3021X User Manual

SIGLENT
SSA3000X User Manual 65
Screen Text
On
Screenshot
Inverse
2.6.2 Couple
Set related parameters according to the coupling relationship.
Auto all: Set Related parameters automatically according to the coupling relationship.
1. RBW
RBW have couple relationship with span. Please refer to the introduction of the "Resolution
Bandwidth".
2. VBW
VBW have coupling relationship with VBW. Please refer to the introduction of "VBW".
4. Attenuation
Input attenuation has coupling relationship with Ref Level, preamp. Please refer to introduction of
the "amplitude".
5. Freq step
Freq step have coupling relationship with RBW at the zero span, when in none-zero mode, Freq
step have coupling relationship with Span. please refer to the introduction of the "Freq Step".
6. Sweep time
Sweep time have coupling relationship with RBW, VBW and span. Please refer to the introduction
of "Sweep Time".
2.6.3 Help
After press Help, press any key to show help information. Press Help second time to close help
information
2.6.4 Save
Quick saving a file, according to “File->Save Type” settings.
Default file type is “PNG”

SIGLENT SSA3021X Specifications

General

Frequency Range	9 kHz to 2.1 GHz
Resolution Bandwidth (RBW)	1 Hz to 1 MHz
Sweep Time	1 ms to 1000 s
Input Impedance	50 Ω
Input VSWR	< 1.5
Maximum Input Level	+30 dBm
Tracking Generator	Optional
Displayed Average Noise Level (DANL)	-161 dBm/Hz
Interfaces	USB Host, USB Device, LAN, GPIB (optional)
Display Resolution	1024 points
Power Requirements	100 V - 240 V AC, 50 Hz/60 Hz
Phase Noise	-98 dBc/Hz @ 10 kHz offset (1 GHz carrier)