Instructions, use and maintenance manual Pag. 11/49
SAU 160-200
Electrocution hazard: the machine must not be used without adequate earthing, and it must be
connected to a system built according to building regulations in force in the country of installation.
Earthing obligation Prohibition to clean and
lubricate moving parts.
Prohibition to remove the
safety devices and guards
Wear the provided PPE during operation (e.g. shoes with reinforced tip, gloves,
goggles and masks).
Clean the machine thoroughly after use.
Do not remove the safety devices or protective casings.
Do not put any objects through the bowl guard with the parts in motion.
Before any manoeuvre wait for the machine to completely stop, turn it off and
disconnect it from the mains.
To Next Page
Loading...