Sigma 160 - Transport and Installation; Transport and Handling; Machine on Pallet; Machine Without Pallet

Instructions, use and maintenance manual Pag. 20/49 SAU 160-200
11. Transport and installation
11.1. Transport and handling
11.1.1. Machine on pallet
Make sure that the lifting equipment capacity is adequate to the load.
Widen the lifting forks as much as possible and make sure they stick out from the pallet.
Work in an area free from persons and animals.
During movement, always keep the load as close to the ground as possible.
Use the required P.P.E. (e.g. shoes with reinforced tip).
Standards on lifting using a forklift truck: always use a pallet to move the machine.
11.1.2. Machine without pallet
Make sure that the lifting equipment capacity is adequate to the load.
Widen the lifting forks as much as possible and make sure they stick out from the
machine.
Work in an area free from persons and animals.
During movement, always keep the load as close to the ground as possible.
Use the required P.P.E. (e.g. shoes with reinforced tip).