Sigma 4-15C - Page 82

Operating Manual SIGMA 4-15C, page 82 of 95
03/06
The curve 9 is a special case compared with the other curves. The centrifuge
accelerates with max. torque. The acceleration time only depends on the mo-
ment of inertia of the rotor.
Linear curve no. Slope
0 240 sec./1000 rpm.
1 180 sec./1000 rpm.
2 120 sec./1000 rpm.
3 60 sec./1000 rpm.
4 40 sec./1000 rpm.
5 30 sec./1000 rpm.
6 20 sec./1000 rpm.
7 10 sec./1000 rpm.
8 5 sec./1000 rpm.
9 0,9 sec./1000 rpm.